The driveway must be neatly arranged to add the beauty of your house’s garden. Besides that, it also makes it easier for you to get in and out. There are four options for driveways, which one do you choose? Asphalt, gravel, concrete or pavers. Of course your choice is based on several factors such as budget, climate, how far the road is, and your condition.
A cheap but not bad option is to use gravel. While asphalt may be costly, cement is also costly and is followed by paving. Indeed, gravel entry roads are affordable in terms of cost, but you will still need a lot of maintenance later on. Even gravel is the one that needs the most attention so that it is always good and not easily damaged.
Annual entrance maintenance includes using herbicides, and raking. Every two years or four years, you have to keep adding to the gravel because it gradually gets into the ground. Every year you have to scratch the gravel so that it comes out of the ground and appears again on the surface of the ground.
If you choose to use gravel for the entrance, this is the right choice, the gravel road will give its own beauty, this will be an attractive entrance. Here we will talk about everything gravel related, from the price to installing gravel in driveways.
What Kind of Gravel Will You Use?
Creating a gravel driveway, you will actually install three sizes of gravel. In the first layer, the pebbles you use should be about the size of a baseball and these are often called “stones”. These rocks will form a strong foundation for your driveway, they also make for better drainage. It also serves as a protection for small rocks so they don’t disappear into the ground. Layers of rock you will install 4 inches thick.
On top of this 4 inch thick gravel, you need to place another 3 to 4 inch stone and the size of a golf ball. This is commonly referred to as “rock”. These rocks have almost the same function, namely to assist the transmission to the upper layer.
While the top layer is gravel that is 4 inches thick and about the size of marble. These rocks can vary in color, black to gray and even rust color, so it depends on the type of gravel.
To each layer of gravel, you need to add a stone that was crushed by the machine, not cobblestone but crushed stone. These are angular, triangular or other rocks. They will lock together at your entrance. We cannot use cobblestones with unstable surfaces, such as river rocks, these are not suitable for driveways. But the rock must be able to stand steady, and this is rock that has been crushed at an angle.
For gravel in the top layer, choose “traffic bound” or “dense-grade” gravel. This rock has rock ash, this dust will become a bond for the rocks to one another when the rock is solidified. So, this rock ash functions similar to cement that binds.
Additional Tips for Construction of Gravel Driveways
The right gravel is very important to prepare to be able to produce a strong and sturdy entrance. However, choosing the right location is much more important.
Before using gravel on the ground, the topsoil or topsoil must be removed first and you can use it in other properties or for ornamental plant planting needs. The large amount of organic matter in the topsoil makes it a good medium for planting plants. However, this layer of soil will create an unstable driveway, so it needs to be dredged and removed first.
While the layer underneath, namely the hardpan layer, the layer below the first layer is tougher and denser and this is good for the foundation of your driveway. At this time, some people use herbicides and there are also some people who use landscaping fabrics. It just depends on how you want to deal with weed problems.
Proper grading is also an important part of making gravel roads. For gravel roads we need to think about how to drain well and drain water quickly. So, the fruit of the center of the gravel is slightly higher than the edges. Also, if your location is in a snowy place, you should make trenches on both sides of the road so it doesn’t make it easier for the water to move.
Each layer of gravel that you have installed, you must solidify using a rolling machine, then add the next layer. If you see this as tough work, consider hiring a professional. Don’t forget to also use the right equipment so that your entrance is completed properly and well and can withstand being crushed by the times.
Questions and answers about making driveways with gravel
Can you apply cement to the gravel?
Yes, you can use cement to strengthen the gravel road, but this is not recommended as long as the gravel you are using is 4 inches thick. However, if your gravel is small, you can use cement as the top layer and the gravel is used as the bottom layer.
Can you paint the gravel driveway?
Yes, you can paint your driveway using gravel. Use acrylic or oil-based paints.
Can you walk on the pea gravel?
Yes, you can walk on pea gravel, this gravel is also suitable for driveways and paths. In fact, you can walk barefoot on it without feeling sick.
Does making gravel driveways require a permit?
It depends on where you live. In some places you sometimes have to apply for a permit before building a path with gravel. Contact the road department for information about this.
Can salt kill weeds on driveways?
Scattering the salt between the gravel of the driveway will kill any weeds that grow there. However this is a long term treatment. Over the years the land will suffer damage. Rain can also spread salt to various areas of your garden, killing many of your plants. So, before using salt to kill weeds, think carefully.